Will Lippert Underchassis Double Bin Storage Unit # LC175180 Fit a Coachmen Chaparral

Question

Question:

Is there any problem getting this unit underneath a coachmen chaparral 360ibl.

asked by: Doug

0

Expert Reply:

We have not heard of any issues mounting the Lippert Underchassis Double Bin Storage Unit # LC175180 on a Coachmen Chaparral. What I recommend is taking a peak underneath the Coachmen to make sure there is a clear area for the 96 inch long, 19-9/16 inch wide frame of this storage unit. If there is a bunch of plumbing, electrical, or other components in the way then either a different location will be needed or the items in the way would have to be rerouted.

expert reply by: Michael H

0

click to enlarge

Answer 1

The overall measurements of the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 is 99-1/2 inches long overall and 23 inches wide at the mounting brackets. The length at the mounting brackets is 78 inches. Please see…

view full answer...

Answer 2

To determine if the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs #LC125460 will be compatible with your 2014 275ULSBS Work n Play trailer you'll need to measure the chassis to ensure the mounting brackets line up…

view full answer...

Answer 3

I could not find any installation videos on our site or Lippert's for the #LC175180 storage unit. Yes the frame brackets are welded in place. I am not sure what your 171.25 number is, but this storage bin solution will work with most 7 to 8 foot…

view full answer...

Answer 4

I reached out to Lippert to get the inside measurements of the storage bins for the Lippert Underchassis Double Bin Storage Unit for RVs - 96" Long #LC175180. I was told the bins were slightly under 17 inches wide (about 16-15/16 inches),…

view full answer...

Answer 5

The Lippert Under Chassis Double Bin Storage Unit, #LC175180 is an universal fit storage compartment. There is no specific model information to see if this product will fit a certain model motorhome or not. The storage unit does have dimensions of 96…

view full answer...

Answer 6

The Lippert Underchassis Double Bin Storage Unit for RV #LC175180 is a simple bolt-on installation, no welding is going to be required as the steel frame of the unit will bolt onto your RV's frame. The storage unit is a total of 96" long x…

view full answer...

Answer 7

We do have a diagram of the Lippert Underchassis Double Bin Storage Unit #LC236558 that shows the overall 99-1/2" long x 19-1/8" wide x 10-1/4" tall dimensions as well as the mounting bolt hole locations as well. I have attached this…

view full answer...

Answer 8

I checked Lippert's actual dimensional engineering drawing for this product to verify the dimensions for you. The overall length of this unit is 96 inches end to end. The outside mounting brackets are 1-1/2-inches x 22-1/2-inches. These require…

view full answer...

Answer 9

While I can tell you how to determine fit, the spring centers of your axle won't come into play. In order to determine fit you will just need to make sure the distance between the brackets will line up. There are three brackets going length-wise,…

view full answer...

Answer 10

The center to center distance between the mounting brackets on Lippert Underchassis Double Bin Storage Unit #LC236558 is 70-1/2 inches. Depending on the width of the I-beam frame rails on your toy hauler it could still possibly work by attaching the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...