Where Does Power Wire for Trailer Wiring Harness 118411 Install on a 2013 Volvo XC90
Question:
I tried to install the wiring but I could not find the wiring to splice in to. The one I saw there was of a different size. It was larger. Is it possible that this unit does not work with my car? I watched the video 10 times and can not figure it out. Thanks!
asked by: Gary J
0
Expert Reply:
On your 2013 Volvo XC90 you aren't looking for a wire to splice the power wire from harness # 118411 to. That power wire will get a ring terminal clamped to it and go over a power stud located directly next to a fuse on the driver's side. Everything else just plugs in. I included a picture showing the stud in question.
expert reply by:
Michael H
0
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Adding a 7-Way and Brake Controller to a 2007 Volvo XC90 with 4-Way Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Wiring Recommendation for a 2007 Volvo XC90
- Q&A: Difference Between Tekonsha Trailer Wiring and Curt Trailer Wiring For 2005 Volvo XC90
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Q&A: Equalizer Upgrade Kit For Keystone Raptor With 33 Inch Axle Spacing & 7 Inch Equalizers
- Q&A: Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey
- Q&A: How Much Should It Cost To Completely Rewire a Trailer
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Maintenance Schedule
- Article: My Trailer Hitch Doesn't Fit