Replacement Hubs and Drums and Brakes for Lippert 6,000 Pound Trailer Axles
Question:
I am needing to replace my 6000# lippert brakes and hubs. they are 8x6 1/2. what brake assmeblies will work for direct replacements?
asked by: Mike
Expert Reply:
Since you have 6K Lippert axles with an 8 on 6-1/2 bolt pattern for the wheels and hubs I assume that the inner bearing is 25580 and the outer is 14125A. It would be worth checking just to be sure. If you have regular axles with no grease fittings at each end then you can use # 8-219-4UC3. If you do have EZ Lube axles with the grease fittings use # 8-219-4UC3-EZ.
For either hub and drum assembly you can use right hand side brake assembly # AKEBRK-7R-SA and left hand side # AKEBRK-7L-SA.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC53UD
- Search Results: drum assembly~7000 lbs axles~8 on 6~12~nev~r~lube
- Search Results: lippert brake drums
- Search Results: trailer tires and wheels
- Search Results: e rated tires
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Provider ST235/80R16 Radial Trailer Tire - Load Range E
- Search Results: lippert trailer brakes
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 916 studs
- Shop: 24x84 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Replacement Brake Shoes and Pads for Dexter 12" Brakes
- Q&A: Disc Brake Kit Recommendation for Lippert 6,000 lb Axles
- Search Results: trailer break kit
- Shop: Trailer Wiring
- Q&A: How to Reset Zero Point Calibration on Lippert Ground Control 3.0
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-200 Review
- Q&A: Replacement Brake Assembly, Bearings, and Grease Seal for Lippert 5,200 Pound Axle
- Q&A: Bearing Kit Recommendation for 6k Lippert Trailer Axles
- Q&A: What Load Range Tires to Use for a 16,000 lb Trailer with 7,000 lb Axles
- Q&A: Recommended Axles for Two Trailer Builds with 14K Capacity & 7K Capacity
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Review
- Article: Testing Trailer Brake Magnets for Proper Function