Ball Mount with the Most Drop for a 1-1/4 Inch Trailer Hitch
Question:
is there such a thing as a 12inch drop ball mount for a 1 1/4inch receiver?
asked by: Nick
Expert Reply:
I have not seen a 1-1/4 inch ball mount that offered 12 inches of drop. The most that we have is a 6 inch drop # C45028 (Class I or II) or # BM96 (Class I).
If this is for a 2008 Jeep Grand Cherokee I recommend switching to a Class III, 2 inch trailer hitch, # 13251, so you can use a ball mount with more drop such as # AMSC12.
Products Referenced in This Question
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 12 Inch
- Rise - 11 Inch
- Fits 2 Inch Hitch
- 7000 lbs GTW
- Class III
- Long Shank
- Shock Absorbing
- Convert-A-Ball
more information >
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Brophy
more information >
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Product Page this Question was Asked From
Trailer Hitch Ball Mount 10" Drop, 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Brophy
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Can the JR Products Duplex Receptacle Be Mounted Horizontally
- Q&A: Replacement Light Bar Strip 2016 Northwood Artic Fox Camper w/ Mounting Holes 10-1/8" on Center
- Q&A: Availability of Convert a Ball Ball Mount # AMSC10 and Hole Diameter for Ball Hole Platform
- Q&A: Recommended Ball Mount for Use w/ a Trailer that has a Lunette Ring
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: How to Carry Bikes While Towing a Travel Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Roof Rack for Little Guy Silver Shadow Tear Trailer
- Q&A: Replacement Inner Member Assembly for UFP A 60 Surge Brake Coupler
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: The 5 Best Trailer Drop Hitches You Can Buy