Weight Distribution Hitch for 2015 Ford Expedition Towing 2017 Apex Nano 15X
Question:
I have a 2017 Apex Nano 15X trailer. My Expedition pulls the trailer with no issues I do believe it would track much easier and be safer to have a weight distribution hitch. Weight is 2920 Dry and can hold an additional 1000 pounds tongue weight is 360 pounds. Im looking for a weight distribution hitch that would be compatible with this trailer and not over kill. My thought is the FA92-00-0450 would be a good option. Suggestions?
asked by: Val F
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Most likely your tongue weight is going to be over 400 lbs when loaded so the best setup will be the Reese Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs and features the only sway control on the market designed to prevent sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Comparing Weight Distribution Systems that Use Chains Versus No Chains
- Article: Determining Trailer Tongue Weight
- Q&A: Does Torklift 36 inch Hitch Extension for Ford 3 inch Hitch Have Capacity for 6,700 lb Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Troubleshooting External Sensor Error on Lippert Leveling System
- Q&A: Weight Distribution Recommendation for 2022 Honda Ridgeline Towing Trailer with 450 lb Tongue Weight
- Q&A: Weight Distribution Recommendation for 2021 Jayco SLX 8 224 BH
- Q&A: Which Blue Ox Weight Weight Distribution System for Lance 1475 Trailer