3,500 lb Timbren Setup Recommendation for Off-Road Wheels and Tires

Question

Question:

Im building an off-road tear camper, and Id like to use the timbren axleless suspension ASR3500S06. Im not set on running trailer brakes, but I need a hub that can accept up to a 17inch wheel and 35inch off-road tire. Thanks in advance!

asked by: Noah

0

Expert Reply:

For a wheel and tire that big your best option would be the Timbren kit part # ASR35HDS02 which is set up for wider tires and also has a 4 inch lift built into it. This is the same 3,500 lb capacity though.

That being said we can only safely recommend using trailer rated wheels and tires wit this kit.

For just a hub without a drum you would want the part # AKIHUB-655-6-K.

expert reply by: Jameson C

0

Answer 1

I have a solution for you, but it will require you to go up to the 3,500 lb version of the Timbren. For that you would want the #ASR35HDS02 and then for hubs part #AKIHUB-655-6-K.

view full answer...

Answer 2

The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS02 is a great product made by Timbren. It is a universal fit product that uses aeon rubber springs as shock absorber suspension. This…

view full answer...

Answer 3

The Timbren Axle-Less systems are all universal, and since they bolt directly to the frame of the trailer can be used on any trailer including your 2019 Forest River R-Pod 179. Based on the information I can find on your R-Pod it appears that you are…

view full answer...

Answer 4

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 5

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 6

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

view full answer...

Answer 7

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 8

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 9

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

3,500 lb Timbren Setup Recommendation for Off-Road Wheels and Tires

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching