Will Timbren Suspension Enhancement System work on Lifted 2004 Dodge Ram Pickup

Question

Question:

Hi Im thinking about the timbren suspension system for front and rear of my 2004 Dodge ram 1500 4x4 and it has a 2.5-3 inch lift on it will they work and do all of the timbren springs come with the spacer blocks? Thanks

asked by: Adam

0

Expert Reply:

Installing a Timbren Suspension Enhancement System is a great way to stabilize and level your 2004 Dodge Ram Pickup 1500 and also provide a more comfortable ride when carrying heavier loads.

For the rear axle, I recommend the Timbren # TDR2500CA. This system has a 6,000 pound capacity and is confirmed to fit your Ram Pickup. This kit does come with two, 1 inch spacers that can be used if necessary. Since you have a 2.5-3 inch lift, you may need more depending on your normal vehicle load. If there is more than 1 inch of space between the spring and axle after installation and normal load is placed back onto the suspension, you will want to use a spacer. If additional spacers are needed, you can use # A25723-90AH00.

For the front axle, you will use # TDF15004C which has a weight capacity of 4,000 lbs. This kit also comes with two, 1 inch spacers.

I have included a video demonstrating this system for your review.

expert reply by: Chris R

0

Answer 1

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 2

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 3

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 7

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 10

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

We only have the #TRSL350 for a shackle that is 3-1/2 inches long from hole center to hole center. Typically these don't wear out as quickly as you described. Are you tightening the shackle bolts really tight which is causing added friction…

view full answer...

Will Timbren Suspension Enhancement System work on Lifted 2004 Dodge Ram Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching