Can Weight Distribution System be Used on V-Nose Trailer

Question:

I have a haulmark 8.5 x 20 passport cargo trailer. it has a v-nose and I only have 24 inches from the center of the ball to the front of the trailer along the frame. does some one make a weight distribution set up for this trailer. thanks Rob

asked by: Robe M

Expert Reply:

To use a weight distribution system on a trailer with a V-nose you will need to use chain hanger brackets that attach to the side of the frame. For that you would want the part # RP58305 and a properly rated weight distribution system.

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.

Once you know your tongue weight you will want to check out the link I attached that has all of the weight distribution systems we carry. You will be able to select your tongue weight from the filters to see what would be rated for your setup.

expert reply by: Jameson C