bing tracking image
Q & A Icon

Will Solera Slide-Topper Slider Fit Trailer With 147-3/4 Inch Wide Slide-Out  

Question:

My flange is 147 3/4 inches. Is a 13foot enoungh? The flange is about 5 inches wide. Do i need longer brackets? Will this fit in the existing beed rail on my camper? It is about 7 to 8 inches from the bottom of the flange. Does this have any anti bellowing lock or cover with it?

0

Expert Reply:

I have attached a link to an installation video for the White Solera Slider, part # LCV000163299 you can check out. It sounds like you are talking about the frame of your slide-out when you mentioned flange. As you can see in the video at about the 1:32 mark, the measurement above the slide-out frame is about 2-inches so the cover slopes when installed.

The cover measure 156 inches wide so it will work with the width of 147-3/4 inches you mentioned. If your bead-rail is standard then this topper should slide right in and work well for you. The minimum you want for your topper is to extend about 2-1/2 inches beyond the side of your slide-out. If your slide-out is longer or shorter let me know and I will see if we have a different topper that will work for you.

This topper does not have a lock and does not include a cover included.

expert reply by:
0
Jeffrey L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>