Where to Find VIN Number on Yakima Rack and Roll Trailers

Question

Question:

Hi, I am selling a 68 and own a 78 I want to make sure i am selling correct one. Where is the vin number located? Thanks

asked by: Charlie W

0

Expert Reply:

If you check out the picture I attached you will see where I pointed out where the sticker is that has the VIN on the Yakima Rack and Roll trailers like the part # Y08106.

If somehow the sticker is worn off or unreadable my contact at Yakima said that if you contact the dealer where you initially bought the trailer you can give them your name and info and they will be able to find the VIN that way as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Most states require the Yakima Rack and Roll Trailer, #Y08106, to be registered, but it registers just like a regular trailer. We provide you with a Manufacturing Certificate of Origin and a VIN number. Take the paperwork provided to your…

view full answer...

Answer 2

The color of the lens of the Replacement Side Marker Light #Y8880178 that you referenced is amber. This is the replacement lens for the clearance light up near the front crossbar of the Rack and Roll trailers like part #Y08107.

view full answer...

Answer 3

I love the Yakima Rack and Roll, part #Y08107, but the trailer isn't designed for in-water use, as none of the electrical components are waterproof or water resistant. I do, however, have an alternate solution. The Rack and Roll is aluminum…

view full answer...

Answer 4

Yakima does not recommend backing their Rack and Roll trailers like the #Y08107 you mentioned into water as the bearings aren't sealed and neither are the electrical connections. Your best option would be to back it right up to the waters…

view full answer...

Answer 5

Since we have started carrying the Yakima Rack and Roll trailer #Y08107 I have not heard any complaints regarding the wheel bearings failing and only a few instances where people wanted to replace the wheel assembly. If you need to replace your…

view full answer...

Answer 6

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but…

view full answer...

Answer 7

The cradle measures 11 x 3 inches, the upright arm is 17-1/2 inches tall and the arm is 6-1/2 inches wide. It's constructed of 1 inch tubing with the padded portions being right at 1-1/2 inches in diameter. The arm locks flat, at 90 degrees…

view full answer...

Answer 8

If you are already planning on needing more space than the 66" Yakima Rack and Roll Trailer #Y08106 can provide then I highly recommend going ahead and getting the 78" Rack and Roll #Y08107 instead. The 78" trailer is a…

view full answer...

Answer 9

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and…

view full answer...

Answer 10

The Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers #Y8880180 measures 9" long total and measures 7-7/16" from the bottom of the bolt head to top of the threads. It is also 14mm (0.55") in diameter. I have…

view full answer...

Answer 11

You can get replacement keys for your Rack and Roll trailer, though they do come with new lock cores as well. They do require you to know the lock core number or key number though, and we have the following as replacements: - Replacement Lock Core…

view full answer...

Answer 12

As long as your existing lock is in the unlocked position you can use key #Y8007835 to remove the old lock and install the new one. If they are locked then you would need to have a locksmith pick the lock or the lock would have to be drilled out.

view full answer...

Where to Find VIN Number on Yakima Rack and Roll Trailers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching