Trailer Hitch Recommendation for 2011 Toyota Corolla
Question:
good afternoon, I am going to rent an u haul trailer 5*8foot and I need to buy the hitch traile and all the other parts, would you please recommend me which ones should I buy for my Toyota corolla 2011? Also do I need to install a wiring system as well or its no necessary. Thank you for your information.
asked by: Julian
Helpful Expert Reply:
First you would want to start with a trailer hitch for your 2011 Toyota Corolla. For that the Draw Tite part # 24913 would be a great option confirmed to fit. I like this hitch best for you because it has the best price and does not require a stabilizer strap if ever used with a bike rack or cargo carrier. I attached an install video for more info as well.
For a ball mount you would need the part # 3593 and then for balls you need part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
For trailer wiring you then would want the part # 118459 which is also a confirmed fit. You will need this so that your trailer taillights will blink and light up when needed so that people behind you can tell when you are stopping and turning.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Fit for 2017 Toyota Corolla
- Q&A: Does Muffler Need To Be Removed To Install Draw-Tite 24913 On 2017 Toyota Corolla?
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Q&A: Trailer Hitch Recommendation for a 2017 Toyota Corolla
- Q&A: Recommended Trailer Hitch for 2017 Toyota Corolla for Bike Rack
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch for 2017 Toyota Corolla
- Article: Trailer Wiring Diagrams
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Tie Down Luggage on a Roof Rack
- Article: Trailer Hitch Receiver Sizes
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Use a Roof Rack (Like a Boss)