Base Plate Kit Recommendation for 2007 Honda CRV for Use with Roadmaster Stowmaster
Question:
We have a Roadmaster StowMaster 5000 Stainless Steel Tow Bar...Need to purchase Base Plate Kit for the 2007 Honda CRV to make this Tow Bar work. Which Base Plate Kit do you recommend?
asked by: George H
Expert Reply:
The correct Roadmaster base plate kit for your 2007 Honda CR-V is the part # RM-521559-4. This will work well with the Stowmaster Tow bar part # RM-501.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs
- Tow Bar
- Coupler Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Stores on Car
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Replacement Cap Kit For HappiJac Truck Camper Jack 4220
- Q&A: Recommended Replacement For A Dometic DOTR12CB RV Microwave