Replacement Bolt Thru Fulton Sidewind Swing Up Jack
Question:
I currently have a Fulton on my boat trailer that has a weld on bracket. The bolt pattern is around 3inch x 5.5. The frame on the trailer is c-Channel 1.75inch x 4. Which Fulton F2 Jack would work? I was looking at the F1413020134. If you dont have one that has the correct bolt pattern. I will probably just use a bolt on.I attached pictures of my existing Fulton Trailer Jacj. Thanks
asked by: Tony L
Expert Reply:
The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs, # FXP15W will work for your application. A similar jack like the Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs, # F141132 is also an option. The bolt through design on the Fulton Jacks is a universal mount for them, so all their bolt through models are compatible with that welded plate on your trailer.
The Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs, # F1413040134, will be the closest bolt on fit for the F2 models. This is a complete bolt on assembly that is not compatible with your current weld on mount. This jack will fit a 3x3 inch tongue or a 3x4 inch tongue frame and is easy to install.
Products Referenced in This Question
Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 12 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Product Page this Question was Asked From
Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs
- Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Alloy Aluminum
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Fulton Trailer Jack - Side Frame Mount Jack - F1411300301 Review
- Search Results: fulton f2 jack
- Search Results: fulton magnum series jack
- Shop: Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
- Shop: Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Q&A: Replacement Jack for Ranger Boat Trailer with Weld-On Jack
- Shop: Replacement Mounting Hardware for Fulton Jacks
- Q&A: Handle Hits Boat Using Fulton XLT Bolt-Thru Swivel Trailer Jack F141132
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Shop: Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Black - 1.5K
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Option to Replace Axle With Axle-Less System on PWC Trailer
- Q&A: Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions
- Article: Best Boat Trailer Jacks
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams