Compatibility of Reese Sway-Control Bracket for 2-Inch Ball Mounts RP26003 with Curt Ball C40093
Question:
Is the Reese Sway Control bracket RP26003 compatible with the Curt Ball Mount C45100? I need a 2inch hitch with a sway control ball that is lower than my current hitch since I traded tow vehicles. I thought Id try this approach rather than weld on a tab like my current hitch.
asked by: Hardy P
Expert Reply:
The Reese Sway-Control Bracket for 2-Inch Ball Mounts # RP26003 will install on any 2-inch ball mount that provides a 1-inch diameter hole for the shank of the hitch ball that secures it in place, including the Curt # C45100. It will also accept any friction-style sway-control unit's ball that has a 5/8-inch diameter shank, such as the Curt # C40093.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 7 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Continue Researching
- Q&A: Recommended Trimax Trailer Wheel Chock and Lock for 175/80R/13 Tires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Q&A: Can The Furrion Vision S Prewired System Be Switched to Us Voyager WiSight Camera System?
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: How to Determine if a Vehicle has a Class I or Class II Trailer Hitch
- Q&A: Difference Between Chrome Plated Steel Hitch Ball and Raw Steel in Terms of Corrosion Resistance
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installing 7-Way Connector and Brake Controller on my 2014 Audi Q5
- Q&A: Can Sway Control Plate # RP26003 be Flipped for Use on Left of Ball Mount on 2009 Toyota Highlander
- Q&A: Can Sway Control Adapter Plate # RP26003 Be Used on the Left or Right Side