Universal Towing Mirrors for a 2017 Jeep Grand Cherokee

Question

Question:

Will the KS3891 fit a 2017 Jeep Grand Cherokee Thew mirrors look great just want to be sure they will fit my jeep. Or can you recommend another model that will fit. Looking for both driver and passenger extensions.

asked by: Mark D

0

Expert Reply:

Towing mirror # KS3891 as well as set # KS3990 are designed to fit on stock side mirrors that have a lip or gap between the glass and the mirror housing. I looked at some pictures of the side mirrors on the 2017 Jeep Grand Cherokee and it does look like the mirrors on it fit that description meaning you can use these towing mirrors.

expert reply by: Michael H

0

Answer 1

For your 2021 Jeep Grand Cherokee the K-Source Universal Tow Mirrors part #KS3990 are a great fit and what we recommend for your vehicle. We installed these on a similar 2020 Jeep Grand Cherokee and found they fit and worked great overall. If you…

view full answer...

Answer 2

For your 2018 Jeep Grand Cherokee the only style of tow mirror we offer is a universal style like the K-Source Dual View part #KS3990 which we know will fit your vehicle and work well. We had the chance to install these on a similar 2014 Grand…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 9

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 10

I attached a picture that shows how much of the etrailer.com hitch part #E98901 would hang below the rear bumper when installed.

view full answer...

Answer 11

Hey Kyle, we have the Curt hitch part #C13065 that fits your 2018 Jeep Grand Cherokee Altitude which would be a really great option. It has great towing capacities and is mostly hidden.

view full answer...

Answer 12

The Hopkins tow bar wiring harness #HM59VR that you referenced is the same as the Hopkins part number 56209 and is for sure a confirmed fit for your 2018 Jeep Grand Cherokee. We sometimes have to change part numbers because more than one…

view full answer...