Recommended Hitch and Hitch Cargo Carrier for 2012 Lincoln MKZ
Question:
We are in the process of buying a cargo carrier for our 2012 Lincoln mkz what would you advise us to get as far as the carrier and type of hitch to buy. More concerned with type of carrier that will not be to heavy for our car. Im at a total loss as to which one to get
asked by: Deborah A
Expert Reply:
The type of hitch made for your 2012 Lincoln MKZ is a light-duty 1-1/4-inch Class I type, such as # 24865 and # C11390. Since both install exactly the same way and offer identical capacities I suggest the power-priced Draw-Tite # 24865.
This hitch comes complete with all required hardware and the installation in your car is shown in the linked video.
You'll also need a compatible Class I cargo carrier such as one of those shown on the linked page. The one I suggest is the Curt # C18110 which I like for its sturdy steel construction and relatively light weight - only 30-lbs. You may care to add a hitch lock to secure the carrier; use part # e98879. Another item you may want to consider is a cargo net like # C18200.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Standard Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Curt Stretchable Cargo Net - 38" Wide x 44" Long
- Cargo Nets
- Cargo Rack Net
- Trailer Cargo Net
- Truck Cargo Net
- 38 Inch Wide
- 44 Inch Long
- Black
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Necessity of Routing Power Wire for T-One Wiring Harness # 118422 When Installed on 2010 Ford Fusion
- Q&A: 2010 Ford Fusion Hybrid Trailer Hitch Recommendation for Hitch Bike Rack
- Q&A: Does 4-Way Mounting Bracket BK4F Work with Curt 4-Way Harness C55411
- Q&A: Is There A Class II Trailer Hitch Available For A 2010 Ford Fusion
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Will the Kuat Sherpa Bike Rack SH12P Fit a 2011 Ford Fusion
- Q&A: Can the Draw-Tite Trailer Hitch # 24897 be Used on a 2013 Ford Fusion Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Q&A: Routing the Power Wire for a Trailer Wiring Harness for a 2014 Ford Fusion
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Hitch Receiver Sizes