What is the Minimum Trailer Frame Height Dutton-Lainson Trailer Jack, # DL22320 Will Fit
Question:
Dutton-Lainson trailer jack, part # DL22320 : Another expert answer gives the max trailer tongue width with supplied bolts as 3 more with longer bolts. What would be the other maximum dimension - tongue channel height - that the #DL22320 will mount to? Thanks
asked by: Mike
Expert Reply:
Theoretically, the height of the trailer frame could be anything over 2 inches tall for the Bolt-On, Drop Leg Trailer Jack, # DL22320. The vertical center to center distance between holes is 1 inch. The gap between the first set of holes and second set of holes is 1-1/2 inches. The minimum trailer frame height would have to be 2 inches.
Product Page this Question was Asked From
Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 2001 - 3000 lbs
- Sidewind Jack
- 28 Inch Lift
- Weld-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Continue Researching
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Q&A: Trailer Grease Seal to Replace 127194TB
- Article: Trailer Maintenance Schedule
- Article: How to Charge a Dump Trailer Battery
- Q&A: Mobile Home Axle Conversion to Electric Trailer Brakes
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Troubleshooting Trailer Tire Wear on the Outside Edge of the Tire
- Q&A: Will the Correct Track Trailer Alignment and Lift Kit Prevent Nose High Towing
- Q&A: Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem Trailer
- Q&A: How Does the Correct Track Trailer Alignment and Lift Kit Really Work
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Hitch Receiver Sizes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams