Trailer Hitch, Wiring, and Brake Controller for a 2012 Toyota Tacoma
Question:
HI I have a 2012 tacoma Double Cab, V6 Need a hitch and harness will be towing 4000 lb trailer What do you recommend, and do you ship to Canada?
asked by: FRANK
Expert Reply:
For your 2012 Toyota Tacoma you can use Draw-Tite hitch # 75236. This is a Class III hitch with a 2 inch receiver. It is rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. I have linked a video showing an example installation for you.
For a trailer wiring harness you can use # 118496 to add a 4-Way flat connector to the rear of the truck. If you need a 7-Way then you would also need to add # ETBC7. And if the trailer has electric brakes of which you want to make use then I recommend the P2 brake controller, # 90885, because it is easy to set up and use and it is reliable. I have included some links that show and explain the ETBC7 installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And yes, we can ship these items to Canada.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 550 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: Pintle-Hitches
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Key Needed for Gorilla Guard Trailer Coupler Lock
- Q&A: Replacement Conversion Kit For Motor For # 781005
- Article: Trailer Wiring Diagrams
- Article: Big Truck Big RV
- Q&A: Trailer Hitch Fit for 2022 Kia Niro PHEV Plug In Hybrid
- Q&A: How To Mount 7-way Connector To Trailer Hitch Receiver On 2021 Subaru Ascent
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)