Do Newer Yakima Roof Rack Q Towers # Y8880048 Fit Older Style Cam Cover Assemblies

Question

Question:

does this q tower fit with the older cam cover assembly? the 2004 an older model. thanks

asked by: Perry

0

Expert Reply:

I spoke with my contact at Yakima and he informed me that the Q Towers, like # Y8880048, have had a design change that occurred a couple of years ago. Despite this change the older cam cover assembly will fit the newer tower. My contact also stated that if you are replacing one of the Q Towers, you should replace all of them since they have slightly different dimensions than the new models.

expert reply by: Michael H

0

Answer 1

It sounds like you are looking for the Replacement Yakima Q Tower without Cam Cover Assembly #Y8880048. This is the portion of the Q-tower that comes with the swivel portion of the tower below it. The landing pad fits below this and is the portion…

view full answer...

Answer 2

The part you referenced, Replacement Yakima Q Tower without Cam Cover Assembly #Y8880048, is an appropriate replacement part for the current generation of the Q-Tower. It is not compatible with the older version according to my contact at Yakima. You…

view full answer...

Answer 3

The thing about hitch extenders is that with each one you use you end up cutting the hitch's capacity in half. Since you would be using two of them you would end up cutting the capacity by 75 percent. When you combine that with the fact that the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 11

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Do Newer Yakima Roof Rack Q Towers # Y8880048 Fit Older Style Cam Cover Assemblies

Product Page this Question was Asked From

Continue Researching