Replacement Grease Seals For Coleman Colombia Pop-Up Camper

Question

Question:

I need two grease seals for my Coleman Colombia pop up camper. It Seems like the ID is one inch, the OD looks like they are slightly bigger than 1 15/16, slightly less than 2 inches. a 1.98 bearing buddy is installed on it. what Size is this.

asked by: Joseph V

0

Expert Reply:

The grease seals that will work for your trailer are part # CE16305A. These seals have an inside diameter of 1-inch and an outside diameter of 1-7/8 inches and are designed to fit a 3/4-inch straight spindle.

For replacement bearings I recommend part # LM11949, and the race that matches this bearing is part # LM11910.

expert reply by: Jeffrey L

0

Answer 1

I went out in the warehouse and pulled the Redline Grease Seal, part #13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for…

view full answer...

Answer 2

Thank you for that info, and we do have that grease seal for you, at the following part number: - Grease Seal #13194

view full answer...

Answer 3

There are really two reasons to replace a grease seal, if they are damaged or worn and leaking grease then that is an obvious factor. If you are replacing bearings it is usually best to replace the grease seals as well because although they may…

view full answer...

Answer 4

Yes, the Dexter Trailer Idler Hub Assembly part #8-91-05UC1 will work with the bearing part #L44643 and the race part #L44610. They both have a 1.980" outer diameter which is why they are compatible with the above trailer hub. As long as…

view full answer...

Answer 5

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

view full answer...

Answer 6

We do not have a bearing kit that contains all the parts you need, but we do have the individual parts. For a grease seal you will want #13194 For bearings you will want #L44649 (2x) For matching race you will want #L44610 (2x) These parts are for…

view full answer...

Answer 7

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

I can help you determine how to find the correct bearings and seals you need for your 1985 Coleman Columbia pop-up camper although there is no database which has all of the individual parts for each year, make and model of trailer. If you pull one…

view full answer...

Answer 10

We do have the brake shoes compatible with your axle. They are 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) #BP04-095. You may also want to consider replacing the entire assembly which would give you all new braking…

view full answer...

Answer 11

Sounds like you have taillights like the part #30-92-001 as we know they use the bulb style that you have. For just LED bulbs we also have the part #ARC75FR as well.

view full answer...

Answer 12

The key for selecting a replacement grease seal is the reference number, in this case #10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is…

view full answer...

Replacement Grease Seals For Coleman Colombia Pop-Up Camper

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching