Recommended Replacement Brake Hub and Drum Assemblies for AL-KO 8490 Brake System
Question:
My rv has an AL-KO 8490 brake system that I want to replace as it is worn. I have two axles, do you have replacement brake and hub packages?
asked by: Laz
Expert Reply:
I can definitely help you replace your AL-KO 8490 hub and drums that are worn. These hub and drum assemblies are for 3500 lbs axles, and there are some great replacement options for you.
I recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K. This hub and drum uses # L68149 inner bearing and # L44649 outer bearings. This assembly includes the bearings, races, grease seal, grease cap, and lug nuts. This has a 10 inch diameter and a 5 on 4-1/2 bolt pattern.
For a 10 x 2-1/4 inch brake assembly, I recommend the etrailer.com 10 Inch Self Adjust Electric Brake Assembly, # AKEBRK-35R-SA for the right hand side and # AKEBRK-35L-SA for the left hand side. These brake assemblies are made to work with 3,500 lb axles. These brakes eliminate the need to make periodic manual brake pad adjustments as they automatically adjust to deliver optimum performance and braking power. The pads are fully bonded to shoes for long life and more braking torque.
I also recommend a bearing packer like the LubriMatic Deluxe # L70025 and LuriMatix LMX Industrial Strength Grease # L11390.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Troubleshooting Toy Hauler With Rear Axle Measuring About 1/2" Longer Than The Front Axle
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: How to Add Tension to Solera Slide-Topper
- Article: Best Bike Racks for Electric Bikes
- Article: Trailer Wiring Diagrams
- Q&A: Solution for Squeaky/Noisy Trailer Suspension with Equa-Flex Equalizers
- Q&A: Proper Solera Slide Topper Tension Adjustment
- Article: Calculating Portable Generator Power Needs
- Article: Performance Chips and Modules
- Q&A: Correct Flat Tow Wiring Harness Didoes for 2022 Ford F-150
- Q&A: Do I Need To Have A 3-Wire to 2-Wire Converter To Flat Tow a 2022 Ford F-150?
- Article: Most Popular Wheel Bearings
- Article: How to Choose the Right Trailer Hitch Class
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer