Is there a Way to Install a 2-5/16 Ball Coupler on a 2 Inch Wide Straight Trailer Tongue
Question:
I purchased an older truck to pull a very small ATV trailer. The truck has a 2 5/16 ball that is rusted in and we cant get of even using an air impact hammer drill. So I thought I would just put a different coupler on the trailer. Having a hard time finding a straight 2 inch channel coupler in 2 5/16, any thoughts ?
asked by: Tim P
Expert Reply:
The 2-5/16 inch straight tongue couplers are going to fit a 3 inch channel. Your best bet is still removal of the ball on the truck. My recommendation is a whole lot of penetrating oil and a sledge hammer. You won't have to whack it very hard but the lateral force will help free it up.
The only other option is to use a channel such as # BDAC3000300. Weld it to the front of the trailer and then use a channel coupler, # PSA256S0303, which will couple to a 2-5/16 inch ball. I have linked videos of both of these parts for you.
Products Referenced in This Question
Pro Series Adjustable-Channel Coupler w/ Low Latch - 2-5/16" Ball - 14,000 lbs
- Adjustable Trailer Coupler
- Coupler Only
- 14000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Thumb Latch
- Pro Series
more information >
Product Page this Question was Asked From
Bulldog 3-Position Adjustable Channel Bracket for Cast Head Couplers - 4" Height Adjustment
- Accessories and Parts
- Adjustable Trailer Coupler
- Lunette Ring
- Channel Bracket
- 24000 lbs
- 3 Mounting Positions
- Bulldog
more information >
Continue Researching
- Shop: Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Q&A: Replacement Axle Options For a Concession Trailer Having 95" Hub Face, 4" Drop and 76" Spring Center
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Search Results: torsion axel for trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Review of Dexter Axle Trailer Axle Parts - Torflex #11 Axle Side-Mount Frame Hardware Kit - DX57FR
- Shop: Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
- Shop: Dexter Torflex #11 Axle Side-Mount Frame Installation Hardware Kit
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Video: Review of Trailer Valet Replacement 2-5/16" Hitch Ball for Trailer Dolly - TVHB25
- Shop: Front Mount Hitch
- Q&A: Differences Between Demco eZ-Latch Trailer Couplers
- Q&A: How To Install The Plug-And-Play Hydrastar Vented Marine Electric Over Hydraulic Actuator
- Q&A: Trailer Hitch & Wiring Harness for 2008 Infiniti FX35
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Q&A: Replacement Hub and Drum assembly for ALKO 8480
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Troubleshooting Brake Controller Installations
- Article: Trailer Hitch Receiver Sizes
- Article: Determining Trailer Tongue Weight
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Couplers