Does etrailer.com Hub part # AKHD-655-35-EZ-K Give Same Wheel Offset as Al Ko Hub
Question:
Is there any wheel offset difference from my al=ko non brake hubs to this e-trailer drum hub? Im talking about the how far the wheel inner face is from the spring center. I hope this makes sence. Im looking at buying 2 drum hubs and 2 self adjusting brake assemblies.
asked by: Dan B
Expert Reply:
Hub faces are designed to be in the exact same position. If the etrailer.com hub part # AKHD-655-35-EZ-K will fit your trailer spindle it will have a hub face dimension that will be the exact same as what your setup currently has.
For a right hand side assembly we have the part # AKEBRK-35R-SA and then for the left hand side part # AKEBRK-35L-SA.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Article: Trailer Tire Sizing
- Q&A: Parts Needed to Replace 12" Disc Brakes with Electric Drum Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Article: Trailer Wiring Diagrams
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Q&A: Can I Install Brakes On Only One Axle Of A 2 Axle Trailer And Which Axle Should They Go On?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer