Replacement Dome Cover for Roof Vent on RV or Enclosed Trailer
Question:
I have a roof vent with a broken cover. its fairly old but looks like this cover is the same...Any idea if these have stayed the same for many years?
asked by: Jim
Expert Reply:
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- MAXXAIR
more information >
Product Page this Question was Asked From
Replacement Dome for Dometic FanTastic RV Roof Vents - Tinted
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- Tinted
- Dometic
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Replace an RV Roof Vent Cover
- Q&A: Can You Replace A Roof Vent Dome Lid With A Different Brand Than The Original
- Article: Trailer Wiring Diagrams
- Q&A: Availability of 63 Inch Replacement Support Arm for Solera Awning
- Q&A: Correct Replacement Fan Motor and Fan for a Fan-Tastic Vent 6500
- Q&A: Replacement Vent Dome for my Fan-Tastic 8000 Series Vents
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Motor for Dexter Group VT 00206
- Q&A: Replacement Roof Vent Lid for 2018 Heartland Sundance ID291QB
- Q&A: Replacing Fan-Tastic Vent Cover on 1999 Roadtrek 190
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: What are the Common Types of Propane Fittings Used on RVs?