Replacement Cradle and Strap Recommendation for Sportrack Hitch Bike Rack

Question

Question:

Replacement cradle, straps for SportRack hitch mount rack.

asked by: Thomas R

0

Expert Reply:

Thanks for the picture of your bike rack. Based on that the correct replacement cradle would be the part # 05002100000. And then for a replacement strap you would need the part # 05002200000.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We do have some options for a Thule bike rack model 515-0109 to replace your cradle and straps. The best options for replacement cradle straps are going to be strap #05002200000 or #853-2569. I've noticed from some of the comments on previous…

view full answer...

Answer 2

If you need the straps that go along with the Replacement Anti-Sway Attachment for Thule Apex and Helium Aero Bike Racks #1500056128, the straps you need are the #852-3006-001 (1 replacement strap) or #TH534 (4 replacement straps). The straps along…

view full answer...

Answer 3

The correct replacement cradle and straps for your Thule Vertex 4 Bike 9029 is the Replacement Hold Fast Cradle for Thule Vertex Bike Racks - Qty 1 #852-3005-002 and the Replacement Straps for Cradles on Thule Bike Racks - Qty 4 #TH534.

view full answer...

Answer 4

We do have some options for parts, but there will be no direct replacements since this rack is no longer made. For your Thule model 515-0109 bike rack, the best options for replacement straps are the #05002200000 or the #853-2569. For the cradles,…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 11

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 12

I'm pretty sure you are correct that the Coil SumoSprings Custom Helper Springs #CSS-1145R will fit your 2018 Toyota Highlander, however, we haven't had the chance to test this out and SuperSprings doesn't have this listed in their…

view full answer...

Replacement Cradle and Strap Recommendation for Sportrack Hitch Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching