Trailer Hitch Fit for 2016 Cadillac ATS 2.5L RWD with Single Exhaust
Question:
Does the Curt C11311 fit the 2016 Cadillac ATS 2.5L RWD car ... the pictures show the two exhaust system. My car is the one exhaust system ... also does it require any drilling? Thanks.
asked by: Richard H
Expert Reply:
I checked with my technical contact at Curt and their Class I hitch # C11311 is a confirmed fit on your 2016 Cadillac ATS 2.5L RWD with single exhaust. This light-duty hitch requires no drilling and includes the required mounting hardware. Installation instructions and a helpful article are linked for you.
If you intend to tow a small trailer the recommended towing ball mount for use with this hitch is part # 3594 and with it you can use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. For a 4-pole wiring harness to operate the trailer's lights you can use # C56180.
If you instead want to use the hitch for a bike rack or cargo carrier you can use the linked pages for these product categories to see suitable Class I 2-bike and cargo carriers such as # C18110 and # S64650.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Standard Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Swagman
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Install Picture of Trailer Hitch on a 2015 Cadillac ATS
- Q&A: Availability of Marine Corps Trailer Hitch Covers
- Q&A: Hollywood Racks Sport Rider SE2 Compatibility With Fat Tire Electric Bikes
- Q&A: Trailer Hitch Recommendation for 2014 Cadillac ATS Luxury AWD
- Q&A: Can Propane Be Used To Power An Everchill 12v RV Fridge
- Article: Performance Chips and Modules
- Q&A: Best Hidden Trailer Hitch for a 2015 Cadillac ATS
- Q&A: Installing 7-Way Trailer Connector on 2005 Ford E-150 Van
- Article: Stability Control for Heavy Duty Vehicles
- Article: Best Air Bag Suspension (2023)
- Article: What Do I Need To Tow A Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches