Can Axle of 1972 Nomad Trailer be Moved to Be Above Leaf Spring

Question:

I JUST WANT TO PUT THE AXLE ON TOP OF THE SPRING LEAFS, ON A NOMAD TRAVEL TRAILER IS IT SAFE?. And what is the safest way.

asked by: Jose

Expert Reply:

Moving the axle of a trailer to be over the leaf spring is something that gets done pretty often and would be safe.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C