Will CE Smith Spare Tire Carrier part # CE27310G Fit a 3-1/2 inch Square Tube

Question

Question:

I would like to know if CE27310G would fit around a 3.5inch square part of trailer? Where I am hoping to mount is that dimension.

asked by: William M

0

Expert Reply:

The CE Smith Spare Tire Carrier part # CE27310G that you referenced will work for you as it is designed to fit trailer frames that are up to 3-1/2 inches wide and 4 inches tall.

expert reply by: Jameson C

0

Answer 1

The Bumper Mounted Tire Carrier #TR-1 is actually meant to fit around 4" square bumpers but we do have some other solutions for you that fit on a trailer with a 3" frame. Among the spare tire carriers on the linked page we have the CE Smith…

view full answer...

Answer 2

I believe I have a solution for you, but I am going to need you to verify your bolt pattern since the only bolt pattern it wouldn't fit is 5 on 4-3/4. I attached an FAQ on determining bolt patterns for you to check out also. Check out the picture…

view full answer...

Answer 3

The center bore is more or less irreverent when using lug piloted wheels which are most common on trailers. The center bore simply needs to fit over the hub which is rarely an issue. I have attached a list of all our wheel/tires that use a 5 on…

view full answer...

Answer 4

I checked into this with Dutton-Lainson, and the limitation on the #DL22120 offset spare tire has to do with the weight of the 15 inch tire and wheels, and not with the physical size. The welds on the carrier are not rated to handle the weight of…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 7

Thanks for the information! Our spare tire carriers are pretty universal and the best one for your boat trailer is going to be the CE Smith Offset Spare Trailer Tire Carrier item #CE27310G. It is made of galvanized steel so it will stand up well to…

view full answer...

Answer 8

Hey Chuck, Malone has a spare tire and mount for the Malone EcoLight Sport Trailer for a Heavy Kayak #MAL73FR with part #MAL33FR. It's just a simple U-bolt that you'll use to clamp the wheel to the frame of the trailer, just like the picture…

view full answer...

Answer 9

The opening on the Yakima HandRoll Kayak Roof Rack #Y04082-2 isn't tall enough to completely clamp around the crossbars on the #MPG475. Yakima said that you can still use it if it is clamped onto the side but you will have to make sure it is…

view full answer...

Answer 10

I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be more expensive than the bunks…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Increasing your wheel size one inch is typically not an issue, so you likely will be able to use a wheel like the Aluminum Viking Series Valhalla Trailer Wheel - 13" x 5" - 5 on 4-1/2 - Silver Spoke #AX02350545BMFL you asked from. If you…

view full answer...

Will CE Smith Spare Tire Carrier part # CE27310G Fit a 3-1/2 inch Square Tube

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching