7-Way Wiring Harness for 2013 Ram 1500
Question:
I was wonder if this will fit a ram 1500 2013
asked by: Raymond S
Expert Reply:
Yes, the Pollak 7-Pole and 4-Pole Trailer Connector # HM40975-11998 could be hardwired to your 2013 Ram 1500 but we do offer no-splicing direct plug-in 7-way 5th wheel harness kits like # PK11893-11932 that fits the Ram with factory 7-way. We also offer just a 7-way/4-pole socket, part # HM40975 that connects to a round U.S. Car connector.
If your truck has neither a factory 7-way nor a 4-pole you can instead use 4-pole kit # C59496 and then add our # ETBC7 7-way kit. Together these two parts will give you everything you need for a fully-functional 7-way that includes circuits for trailer brakes and 12V trailer power.
Please let me know how your truck is configured now and what you're looking to do and I will be glad to confirm the correct items for you. A link to all wiring kits for the truck is included, along with a helpful article on wiring.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7-1/2 Feet Long
- Custom Fit
- 7 Round - Blade
- Pollak
more information >
Product Page this Question was Asked From
7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Kwikee Electric Steps for a 2005 Jayco Greyhawk 31SS
- Article: Trailer Wiring Diagrams
- Q&A: Checking Electric Trailer Brake Magnets for Wear, Shorts, Amperage, and Resistance
- Q&A: Why Would New Trailer Brakes Feel Weak After Axle Replace
- Q&A: Determining Axle Length for Home-made 4 x 8 Trailer Using Square Stub Spindles
- Q&A: Recommended Square Bulldog Jack with 5,000 lb Capacity
- Q&A: Trailer Tire Wear on Right Side, Outside Tread Only and Trailer Pulls Hard to One Side
- Article: Brake Controller Installation: Starting from Scratch
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Replacement Trailer Clearance Light for PM150
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings
- Article: Flat Towing Package for 2012-2014 Honda CR-V