Why Does Curt Hitch for 2016 Cadillac SRX Have Higher Capacity than Vehicle
Question:
2016 Cadillac SRX, FWD Premium edition. Owners manual says 3,500 lb trailer capacity, your hitch info says its capacity is 5000 capacity, 500 lb hitch weight. Ok, does your hitch have the capacity of hauling a 5,000 lb trailer on a 2106 Cadillac SRX FWD?
asked by: Hays E
Expert Reply:
A lot of times our hitch manufacturers rate their hitches for higher towing capacities than what the vehicles they fit have. This is just a way to make sure the hitch never fails. You always have to go by the lowest rated component in a setup for the overall capacity as you are only as strong as your weakest link.
The American made Curt hitch part # C13002 that you referenced would be a great choice though. I attached an install video for more info for you to check out as well.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you would then want the part # 118259.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Curt vs. etrailer Trailer Hitch For 2016 Cadillac SRX
- Q&A: Recommended 2 Inch Trailer Hitch for a 2013 Cadillac SRX
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Motorhome Side Of Air Force One Braking System For 2021 Fleetwood Discovery On Freightliner Chassis
- Q&A: Can You Add a Friction Sway Control Bar to a Trailer with Short Tongue
- Q&A: How To Secure 4-Way On 2016 Cadillac SRX With Curt Hitch
- Q&A: Can a 4-Way Trailer Connector be Plugged Into a 5-Way Vehicle End Trailer Connector
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Performance Chips and Modules
- Article: Which Hitches are Made in the USA
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups