1-1/4 inch Trailer Hitch Recommendation for a 2013 Toyota Sienna
Question:
I need a trailer hitch for a 2013 Toyota sienna minivan. light duty is fine.i prefer a 1and 1/4 receiver. most important highest off ground or hidden. also need lights plug. possible installation.
asked by: Ron S
Expert Reply:
For a trailer hitch for your 2013 Toyota Sienna you would want the Draw Tite hitch part # 36513 which is a confirmed fit and is a 1-1/4 inch size hitch like you requested. The smaller size will be less visible and would provide slightly better ground clearance.
For a ball mount you would want the part # 36051, 2 inch ball part # 19258, 1-7/8 inch ball part # 19256, and for trailer wiring part # C56106.
I attached install videos for both the hitch and the wiring kit.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Adjusting Exhaust Hangers on a 2020 Toyota Sienna for Draw-Tite Trailer Hitch Receiver
- Q&A: What Transmission Cooler do You Recommend for My 2017 Toyota Sienna?
- Q&A: How Do I Know How High The Ball Should Sit Above the Ground
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Recommended Trailer Wiring Harness For A 2012 Toyota Sienna XLE
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Tie a Ladder to a Roof Rack
- Q&A: Recommended Hitch for 2015 Toyota Sienna XLE
- Q&A: Difference between Tekonsha T-One and Curt T-Connector Wiring Harness for 2007 Toyota Sienna
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch