Hub Recommendation for Timbren Axle-Less System ASR1THDS03 with Jeep Bolt Pattern
Question:
building trailer for jk - with 2inch lift jk has a 2-inch - 2.5inch lift trailer tires will be 32-33 to match jk want the correct part so the trailer frame is level with jk... but also want the hubs so that I just mount wheels - it appears that this part needs the studs-is that on the hub? please provide links for parts to complete this order.
asked by: Me
Expert Reply:
Typically the Jeep wheel bolt pattern is 5 on 5 inch. For an idler hub that will fit the spindles of the part # ASR1THDS03 and have the correct bolt pattern we have the # AKIHUB-550-35-K. This is a 3,500 lb trailer hub.
The # ASR1THDS03 has a 4 inch lift built into it so it would work well for you since your Jeep is also lifted.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Jeep Wheel Compatibility with Timbren Axle-Less Trailer Suspension System
- Q&A: Recommended Axle To Use Off-Road Jeep Wheels/Tire On Trailer
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K
- Q&A: Recommended Timbren Axle Less System and Hub with 5 on 5-1/2 Bolt Pattern
- Q&A: What is Suspension Travel of Timbren Axle Less Kit
- Shop: Trailer Wiring
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Video: Review of Ark Straight Tongue Trailer Coupler - Articulating Off Road Coupler - AR44FR
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Q&A: Adding a Battery to a Trailer with a 4-Way Connector
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: Determining Trailer Tongue Weight
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams