Is an Air Bubble in the Gauge of the Valterra Adjustable Water Regulator Normal

Question

Question:

Ordered this item and when received noticed a water bubble in the gauge This doesnt seem correct to me. Is it?

asked by: Robert D

0

Expert Reply:

Air bubbles in the gauge of the part # A01-1117VP are normal. High pressure gauges like this tend to have air bubbles in them by design and it would not affect how it works at all.

There is glycerin and an air bubble in the gauges now. This is an improvement they made to the gauge according to my contact at Valterra.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 3

So I just want to start with the brakes. Due to you having the 4,400LB Lippert axle you will need their Brake Kit #LC66WD for each axle. These brakes are forward self adjusting like the Dexter you were looking at. For a cushioned equalizer I prefer…

view full answer...

Answer 4

Thanks for the picture of your build sheet! It does look like the etrailer 6-Leaf Double-Eye Spring item #e94SR you purchased is the correct replacement spring. Feel free to email me back a picture of your suspension but unless you are flipping your…

view full answer...

Answer 5

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 6

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 7

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

Answer 8

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

Is an Air Bubble in the Gauge of the Valterra Adjustable Water Regulator Normal

Product Page this Question was Asked From

Continue Researching