Replacement Brake Assembly Recommendation for 1997 MasterCraft 20 ft Boat
Question:
Data: 1997 MasterCraft 20foot boat, tandem trailer UFP Model A-60 actuator w/ manual lockout 10inch x 2.25inch drum brakes, single servo Hub seal: 2.330inch hub x 1.687inch spindle x 0.532inch thick. no readable part number. Inner bearing: L68149 on 1.377inch spindle Outer bearing: L46649R on 1.061inch spindle Existing drums can be machined within specified limits. Existing bearings and races are perfect. Questions: 1. Are the complete backing plate assemblies No. 18787 and 18788 the correct replacement for the OEM brakes? 2. Can I upgrade to self-adjusting assemblies No. DMSB24428M and DMSB24429M without any other equipment or parts changes? 3. Is the Titan Galphorite backing plate assembly No. T4445300 durable for freshwater boat trailer use? The listed part is a RH assembly, but I could not find a corresponding LH assembly. Is it available? 4. Is the Redline hub seal No. 168233 the correct replacement for the OEM seal? 5. There is no evidence of master cylinder leakage, but if it is required, do you have a replacement master cylinder or rebuild kit for this OEM system?
asked by: Doug G
Expert Reply:
Since your trailer has 10 inch by 2-1/4 inch brake assemblies currently all of the assemblies you mentioned are going to work. I would go with the sefl-adjusting part numbers # DMSB24428M and # DMSB24429M though since you mentioned you were interested in that option.
The matching Titan assemblies are part # T4423500 for the left hand side and part # T4423400 for the right hand side.
Based on the seal dimensions you listed the part # 168233 is the correct replacement.
We don't carry a replacement UFP brand master cylinder.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.688 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Demco Hydraulic Drum Brake - Single Servo - Galvanized - 10" - RH - Self-Adjusting - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly - 10" - Right Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly - 10" - Left Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Demco Hydraulic Drum Brake - Single Servo - Galvanized - 10" - LH - Self-Adjusting - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Continue Researching
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: How To Check That Hydraulic Brakes On Demco Kar Kaddy SS DM9713045 Are Working Properly
- Q&A: Correct Hydraulic Drum Brakes For Demco Kar Kaddy Tow Dolly
- Q&A: Replacement Hub for Demco Tow Dolly
- Q&A: Are The Wheels and Bearings Separate for the Demco Kar Kaddy SS Tow Dolly
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Article: How to Install E-Track in 3 Easy Steps
- Article: Where to Position the Trailer Axle?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires