Does Dutton Lainson Worm Gear Winch DL11011 Require Cable Fastener

Question:

I am planning to use the DL 11011 winch to hoist a 150 LB. personal pontoon boat up 20’ to the ceiling of my garage. I plan to use 5/16” synthetic double braid rope on the drum. Is there any real need to use the DL24361cable fastener to attach the rope to the drum? I especially choose this winch for the self braking capability and the ability to use my battery powered hand drill to drive the worm gear. The amount of help etrailer provides its customers is amazing. Thanks.

asked by: Chuck H

Expert Reply:

To secure a cable on the Dutton-Lainson Worm Gear Winch - 1,500 lbs, # DL11011, you will use a series of loops around the reel and gear. You will not need to use a cable fastener or cable keeper to do this. I have attached a diagram that shows how the cable should be fed through the reel and gear for you to check out.

I spoke with my contact at Dutton-Lainson and she assured me that a 3/16 inch diameter cable will work with this winch. I recommend using the Hand Winch Cable - 3/16 Inch Diameter, # DL24043. This galvanized steel cable will allow the winch to keeps its 1,500 lb capacity.

expert reply by: Jameson C