Availability of Hub that Has Bearings 25580 and LM67048
Question:
Have inner bearing Hoover 25580 measured 1.75 Outer bearing NTN LM67048 measured 1.25 Inner bearing seal measured 2.12 Rear brake shoe is 2x12 front is 2x10 And the mounting bolts for backing plate only has 4 bolts Curious if theres a regular hub that will fit this spindle and braking assembly. Thanks for your time
asked by: Lance
Expert Reply:
We have several hubs that will fit the spindle you have on your trailer. Which by the way thank you for getting me the bearing numbers.
For a hub with drum that would fit you would want the part # 8-201-5UC3 which will fit and has a 6 on 5-1/2 inch bolt pattern. I attached a review video for you to check out.
For brake assemblies you would want the part # AKEBRK-7R-SA for the right hand side and part # AKEBRK-7L-SA for the left side.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc Brakes
- Article: Trailer Tire Sizing
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: What Replacement Disc Brakes do I Need for My TDE46890 System?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Choose the Right Trailer Hitch Class
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trostel 324-216-8 Replacement Grease Seal
- Q&A: Replacement Trailer Hub Grease Seal for TCM 17255TB Seal
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide