Kodiak Trailer Disc Brakes for 7,000 lbs AL-KO Axles
Question:
Is it safe to assume that a set of 7000lb AL-KO Axis Torsion axles built in 2014 have the standard spindle and backing plate location? I noticed that Dexter acquired AL-KO shortly after the build date on my axles.
asked by: JJ
Expert Reply:
Yes, it is safe to assume that a 7K axle from AL-KO built in 2014 will have standard spindle and brake mounting specs. It looks like you were looking at disc brakes. If that is the case, the Kodiak Disc Brake Kit, # K2HR79E, that you came from will fit your axles. The bearings and seals are sold separately, so I listed them for you below
Inner bearing - # 25580
Outer bearing - # 02475
Grease seal - # RG06-070
or
Oil seal - # 10-63
You will need two of each part number. I have attached a disc brake installation video for you to check out.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Unitized Oil Seal for Trailer Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Parts Needed to Convert Trailer with Tandem Dexter 7k Axles to Electric Over Hydraulic Disc
- Q&A: What Fuses Need to be Pulled to Flat Tow 2017 Honda Fit
- Q&A: Wheel Stud Length for Trailer Hub # 8-231-9UC1-EZ
- Q&A: Hub, Slip On Rotor Kit Recommendation for 7k Timbren Axle Less Kit
- Q&A: Correct 1/2 Wheel Stud for Dexter 7K Axle
- Q&A: Valve Stem Extensions for 2015 GMC Sierra 3500 Dually To Make Inflation Easier
- Q&A: Kit for Converting 2018 Cedar Creek 34RL2 to Disc Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Performance Chips and Modules
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes