Is Backing Plate Needed to Mount Erickson ATV E-Track Tie-Down Kit to an Aluminum Trailer
Question:
I have a 10 foot Aluma aluminum trailer for hauling a Polaris Ranger 900 EPS with a weight of 1400 lbs. Whats the recommended way to mount the Erickson ATV E-Track Tie-Down Kit # EM09160 to an aluminum bed ? Do I need a backing plate ?
asked by: Dave
Expert Reply:
If you can bolt the chocks of the Erickson ATV E-Track Tie-Down Kit # EM09160 to some main support beams under the floor of your aluminum trailer then you would not have to use a backing plate. But if you need to attach them to the floor where there are no supports then you would need to use a backing plate, # e96RR. The backing plate will disperse the force applied to the chocks over a wider area.
The chocks are painted which will help with galvanic corrosion (because of the dissimilar metals) but the backing plate is not painted. It is zinc plated though.
Products Referenced in This Question
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Product Page this Question was Asked From
Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- ATV-UTV Tie Downs
- E-Track Ends
- 1 Strap
- Manual
- 6 - 10 Feet Long
- E-Track Strap
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Do I Need To Install Backing Plates For My 8' Section Of E-Track
- Q&A: Correctly Rated 225/75-15 Trailer Tires For 7,000 lb Tandem Axle Trailer
- Shop: etrailer E-Track Backing Plate w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 1
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Search Results: e~track wheel chocks
- Search Results: e~track rails
- Search Results: e~track backing plates
- Search Results: em09160
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
- Search Results: erickson e~track
- Video: Review of Erickson ATV-UTV Tie Downs - E-Track Chocks Ratchet Strap Kit - EM09160
- Video: Erickson Tie Down Straps - Trailer - EM58523 Review
- Video: Erickson E-Track Strap with Ratchet Review
- Video: Review of etrailer Tie Down Anchors - E Track Backing Plate 3 Pack - e46RR
- Video: PackEm Wheel Tie-Down Kit Review
- Q&A: Can I Use One Erickson ATV E-Track Tie Down Kit # EM09160 for Different Wheel Sizes?
- Q&A: Will Vehicle Move When Secured with Erickson ATV E-Track Tie-Down Kit w/ Ratchet EM09160
- Q&A: How Many Wheels Does Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks Secure
- Q&A: Can Erickson ATV E-Track Tie-Down Kit # EM09160 Be Installed w/One in Front and One in Back of ATV
- Q&A: Grade Hardware for Installing Erickson ATV E-Track Tie-Down Kit # EM09160
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1
- Shop: Trailer Hitch
- Search Results: safety chains
- Search Results: 90160
- Video: etrailer Horizontal E-Track Review