Trailer Hitch, Ball Mount, Ball, and Wiring for a Jeep Grand Cherokee Rocky Mountain Edition
Question:
Does this hitch fit a Grand Cherokee Rocky Mountain edition. What other assesories will I need to do the complete installation. Thanks
asked by: Chuck S
Expert Reply:
I spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Grand Cherokee Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details below.
The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball mount is # 36051 for use with ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you can use Tow Ready Custom Fit Vehicle Wiring, # 118425. I have included a link to the installation details and a video install on a similar vehicle below.
If your Grand Cherokee has a tow package, you can use Tow Ready Custom Fit Vehicle Wiring, # 118381. I have included a link to the installation details below.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Will Thule Bike Rack Fit in Curt Trailer Hitch Receiver 13424
- Q&A: Does Carriage Bolt Blocks Come with Curt Trailer Hitch 13424
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Determining Trailer Tongue Weight
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: 4-Way to 7-Way Adapter Recommendation for Installing Curt Echo Brake Controller
- Q&A: Installing Trailer Hitch On 2005 Jeep Grand Cherokee Laredo
- Q&A: Does Spare Tire Stay In Place with Trailer hitch Installed on a Jeep Commander or Grand Cherokee