Tonneau Cover for 2016 Toyota Tundra CrewMax w/ 5-1/2ft Bed and Deck Rail System

Question

Question:

I am looking for a tonneau cover for the below truck: 2016 Toyota Tundra Crewmax 5.5foot bed w/ deck rail system. I am having issues with finding one that will fit the deck rail system. When I search for it, a few listings appear but then when I look at the product it says it works without the deck rails. Please help. Thank you

asked by: Tony

0

Expert Reply:

I checked with my Access representative, and have confirmed that the # 834532009435 Access Vanish Soft Roll-Up Tonneau Cover is indeed compatible with a 2016 Tundra Crewmax with the 5-1/2 foot bed and the bed rail system. The Truxedo Lo Pro QT, # TX563801 is also a fit.

I would recommend the Truxedo Tonneau cover. The Lo Pro QT offers a lifetime warranty, as opposed to the 3 year warranty offered by the Access Vanish.

expert reply by: Mike L

0

Answer 1

The Rhino-Rack Reconn-Deck Overland Truck Bed Rack #RR96VH will fit with the Deck Rail System on your 2019 Toyota Tundra, but the rails of your cover will make contact with these legs since they will sit flush with the bed sides of your truck. Since…

view full answer...

Answer 2

I do have an option that will work for you but the Topline 2 Bike Carrier Truck Bed Mounted Expandable Bike Rack part #UG2500 will not work with the Roll-N-Lock tonneau cover you have on your 2013 Ford F-150 as the mounting clamps will interfere with…

view full answer...

Answer 3

Yes, the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack #Y01118 that you referenced can be used with bikes that have disc brakes like you have. I attached a review video for this rack for you to check out as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...