Are Spindle Washers Needed if the Trailer Axle Does Not Already have Them
Question:
I bought new hubs and brake assemblies for my trailer. The kit does not come with a spindle washer. I did not have one before, do I need one? The axle is a 2200 pound axle.
asked by: William F
0
Expert Reply:
The 2,200 pound axles that I have seen all had a spindle washer. It is possible that your trailer didn't come with one but it is unlikely. The ends of your spindles are likely 1 inch in diameter since it is a 2,200 pound axle so you can use washer # SW1000. Spindle washers protect the castle nut as well as provide evenly distributed force when tightening the nut.
expert reply by:
Michael H
0
Products Referenced in This Question
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Could/Should Zerk Fitting of EZ Lube Spindle Be Removed to Install Bearing Buddies
- Search Results: 2441
- Search Results: cargo trailer windows
- Shop: Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Washer For 1" Spindle
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: dust cap
- Search Results: grease seal
- Search Results: grease seals
- Search Results: grease cap
- Search Results: 58846
- Video: Review of DeeMaxx Ceramic Brake Pads With Steel Back Plates 3500 - 6000 LBS Caliper - DE38VR
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Q&A: Availability of Replacement Hubs for a Harbor Freight Trailer
- Video: Curt Wiring - Trailer Connectors - C56175 Review
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Shop: Replacement Exterior Pop-Up Roof Vent - Steel - 13-1/2" x 8" - Black
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 6 on 5-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Wiring
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13100 Review
- Q&A: Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.
- Q&A: Grease Cap Plug for Trailer Hub Dust Cover
- Q&A: Will These Grease Caps part # RG04-010 Fit my Dexter Axle
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Article: Trailer Wiring Diagrams
- Video: Review of TruRyde Washer For 1 Inch Spindle - SW1000
- Video: Review of DeeMaxx Trailer Brakes - 3.5K 10 Inch Maxx Coat Disc Brake Assembly - DE89YR
- Video: Review of DeeMaxx Trailer Brakes - 3.5K Slip-On Rotor Disc Brake Kit - DE42FR