bing tracking image
Q & A Icon

Will The Dutton-Lainson Boat Trailer Roller Bunk, # DL21741, Fit On 6-1/2 Foot Bunk Boards  

Question:

the bunk boards on my trailer are 6x6s and have been cut at about a 30 degree angle and they are 6 1/2 feet in length. could i get by with 1 set of the 5ft rollers and what bracket would i need to attach them directly to my existing bunk boards.

0

Expert Reply:

The Dutton-Lainson Boat Trailer Roller Bunk, # DL21741, is a set of two 5 foot roller bunks. The weight capacity of the set of two rollers is 3,000 lbs. You will need to check the weight of your boat and if your boat is less than 3,000 lbs. loaded on your trailer, then you will be able to use the set of two rollers.

You would mount one 5 foot section on each bunk board on each side of the trailer. The 5 foot roller sections require two brackets per section, so you will need a total of four of the Dutton-Lainson Roller Bunk Bracket, # DL21742.

expert reply by:
0
Jeff D

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>