Weight Distribution System Recommendation for a 2012 Nissan Armada Towing a 2017 R-Pod 176T
Question:
Weve got a 2012 Nissan Armada that can tow up to 6500lbs. Just purchased a 2017 Rpod 176T..max weight 3800. We are looking at the Fastway E2 for 6000/600, but our dealer does not have in stock nor do they install. They are directing us toward the Reese Pro which is for 750-1000 tongue weight...seems like a bit much for what we are towing?! What do you recommend and is it safe to tow this RPod home and then find someone to install the E2?
asked by: Beth
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
The Reese system the dealer is pushing you towards is going to be rated too high for your application. It will give you a very harsh ride.
The Fastway part # FA94-00-0600 you were originally interested in would be the correct rated system. It has a tongue weight range of 400-600 lbs which would be right where you would need.
For a 2 inch hitch ball you would want the part # EQ91-00-6080 or for a 2-5/16 inch ball part # EQ91-00-6100.
Products Referenced in This Question
2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 8000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Will Brake Lights Flash When Using Curt True Course Sway Control
- Q&A: Determining The Correct Replacement Brake Assemblies For A 2021 Heartland Mallard M27