Availability of Longer Weight Distribution Shank for Equal-I-zer System to Clear Tailgate
Question:
I need an extended shank for my Equalizer hitch to prevent my tailgate from hitting the jack. My current shank is 10inch from vertical post to end, 12inch overall. Pin is located 9inch from outer face of post. I need an additional 2inch 11inch pin location. Vertical post is 10inch +/- Do you have a suggestion?
asked by: Jim
Expert Reply:
Equal-I-zer offers some longer weight distribution shanks than their standard 12 inch long shank that will provide you plenty of clearance to allow you to fully open your tailgate. I recommend the Equal-I-zer Weight Distribution Shank, 18 Inches Long with 8 Inch Rise or 4 Inch Drop # EQ90-02-4600. This shank is compatible with 600-1,400 pound tongue weight capacity systems. The # EQ90-02-4600 will fit 2 inch x 2 inch trailer hitch receivers and measures 18 inches long overall.
If you need a shank with a longer vertical post, another option is the Curt Weight Distribution Shank, 14 Inches Long # C17122. This shank has an overall height of 10 inches like your existing shank and measures 14-1/2 inches from the center of the hitch pin hole to the face of the outer post. The weight capacity of this shank is 15,000 pounds with a tongue weight capacity of 1,500 pounds.
I have linked all of our available weight distribution shanks for you. If neither of the shanks I recommended will work for you, feel free to let me know and I will be happy to make a better recommendation.
Products Referenced in This Question
Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Q&A: Weight Distribution Shank that Allows Truck Tailgate to Fold Down
- Q&A: Shank Recommendation for Using Equal-I-Zer Weight Distribution System in 2-1/2 inch Hitch
- Shop: Replacement Front Cover for Solera Power RV Awnings - Regal Drive Head - Black
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Does Hitch Ball Angle Need Adjusting For Equal-i-zer Weight Distribution
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Would Switching a Weight Distribution Shank to A longer One Change the Height of a WDS
- Q&A: Can Other Brands of Weight Distribution Heads be Used with Equalizer Shank # EQ90-02-4700
- Q&A: Reducer Sleeve for Equal-I-zer Weight Distribution System in 2-1/2 Inch Receiver of 2016 Ford F350
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Article: 2023 Best Gifts for RVers & Campers
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Top Gifts for Dads in 2024