Summer Starts Here - Save up to 70%
This large dry box keeps your cell phone, wallet, camera, and other small items safe and dry on your boat. It's made out of tough, see-through plastic that is waterproof and airtight. It attaches and removes quickly with a 4.5" vacuum cup.
Features:
Specs:
This dry box is perfect for storing your valuables on your boat. The box is waterproof so your wallet, cell phone, camera, and other small valuables stay dry around wet passengers, or in the rain. The lid has 2 clips that prevent the box from opening unexpectedly. The clear, hard plastic construction lets you see what's inside without opening the lid and you don't have to worry about your valuables getting crushed. The dry box also includes a lanyard that makes it easy to carry to and from your boat without removing the contents.
The dry box is quick and easy to mount. To install the box make sure the mounting surface is clean and place the vacuum cup on your boat's dash, or any other non-porous surface then press the pump several times until the orange band disappears. To break the seal and remove the box from your boat simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at the SeaSucker Dry Box, part number 302-5501. Keep your cell phones, keys, wallet, or any other gear dry in the SeaSucker Dry Box. It's gonna mount to any horizontal surface on your boat with the attached vacuum cup. The two latches keep it closed. (latches click) And the integrated seal prevents water from getting in. It measures seven and a half inches wide by three and a half inches tall, and it's three and a half inches deep.
The 120-pound pull strength means that it's not going anywhere. Now that we got all the features, I'll go ahead and show you how to get it installed. To get it installed, you'll wanna be sure that the surface you're mounting it to is clean of any dirt or debris. You'll also want to avoid any cracks or chips on the paint. Then we can moisten the bottom of our vacuum cup.
I've already gone ahead and done that. And then we can set it in place. I'm gonna apply a little bit of pressure, and then I can begin depressing the pump cylinder until the orange band disappears. With it fully disappeared, we're all set. It's a multipurpose lubricant sealant.
This is to help maintain your pump cylinder. Just put a little bit around the edge and depress the pump cylinder until it works its way in. To get it removed, simply press in on the T tab on either side. (soft rock music) When you're all done, it includes a cover so it can protect your vacuum cup. And that's gonna complete our look at the SeaSucker Dry Box, part number 302-5501.
(soft rock music).
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.