bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement Trailer Hub Components for Trailstar Trailer with Idler Hubs  

Question:

2000 Trailstar trailer, 1-1/16inch spindle, EZ Lube design I am looking at replacing every part installed inside the hub, so below is my list of parts needed with measurements if no part number was found. 1 nut for spindle. Either regular nut with retainer or a castle nut should work. Thread on spindle measures 0.7985 2 D washer for spindle. Inside diameter obviously same as the nut above. Outside diameter is 1.65 3 bearings and races. L44649 are the inner and outer bearings. I believe the races are L44610. Correct me if I am wrong. 4 inner seal. 10-60 is the number on the seal. Has a 1.5inch inside diameter. 5 rubber o ring with 1.5inch inside diameter If you could provide me with the part numbers for the list above it would be greatly appreciated. Just want to make sure I am getting the correct parts. Thank you!

0

Expert Reply:

Hubs that use # L44649 inner and outer bearings are idler type hubs like # AKIHUB-440-2-2K. The correct matching race is indeed part # L44610. We offer these as individual parts but we also offer a complete bearing kit # BK1-150 that includes bearings, races, grease seal with o-ring, tang spindle washer and cotter pin. For a D washer use part # 5-23 and for a castle nut use part # 165931.

expert reply by:
0
Adam R
Ask The Experts a Question >>

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>