How Does the Gooseneck Hitch Ball of a B and W Turnover Ball Release from a Hitch

Question

Question:

is there a pin holding the ball in when it is overturned upside down in storage? How do I remove it ? I yanked and yanked and it does not come out. not rusted in, but looks like a pin is going across it.

asked by: Randy

0

Expert Reply:

There will be a lever underneath the rear wheel well of your truck that will need to be pulled out so that the ball of the hitch can release.

I attached a picture of what the lever will look like.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Though there is not a separate lock available for the latch pin handle of the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1108 that fits your 2002 Ford F-250, it would not be able to be removed by a teen or young kid. If you take…

view full answer...

Answer 2

Thanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th…

view full answer...

Answer 3

We categorize our fenders by the size wheels they're compatible with, as you can see by clicking the link I've provided for you. I don't have any reference that will tell me the exact replacement fender that's needed for your boat…

view full answer...

Answer 4

The pin holes in the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 are 3/4" in diameter for a 3/4" Pin #BD0233060301. The 8 holes are spaced 1" on center vertically for 8" range adjustment.

view full answer...

Answer 5

I could not find a reference to Class V-19, but the B&W 2-5/16" Hitch Ball #BWHB94002 is Class V rated and has a 24,000 lb weight capacity. The hitch ball has a 1-1/4" diameter x 2-1/2" long shank so as long as your ball mount…

view full answer...

Answer 6

When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With the…

view full answer...

Answer 7

The formula to determine 5th wheel turning clearance is pretty straightforward and is expressed as: (A + B) - C = Clearance A = Distance from center of fifth wheel hitch jaw to truck cab B = Length of Sidewinder arm (22-inches) as with part #RP34FR C…

view full answer...

Answer 8

The B&W 2-5/16-inch Replacement Gooseneck Hitch Ball #BWGNXA2000 is the correct part for the under-bed hitch in your 2009 Dodge Ram 2500. It will fit the 2-1/2-inch square opening in your bed. There are other similar replacement B&W balls for…

view full answer...

Answer 9

Yes, the max drop of the Curt Short Arm part #C17333 is only 1/2 inch due to the head design. For a shank that you could use with this system that would allow a 3 inch drop you would want the Curt #17120 which can do a drop of up to 5 inches. There…

view full answer...

Answer 10

For a similar Curt hitch that is designed for the 2015 Ford F-150 models that do have the factory hitch you would want the part #C26HR which is a confirmed fit. It has a towing capacity of 10k total trailer weight and 1,000 lbs tongue weight when not…

view full answer...

Answer 11

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches part #BWGNRK1062-5W for the 2006 GMC Sierra 3500 needs replacement pin handle part #BW1900-2-2007. If your actual pin is bent on the underside of the center section…

view full answer...

Answer 12

I was able to track down a set of instructions for the Dometic RV Toilet Floor Flange Adapter Kit #DOM73FR that you referenced and I attached them to this page.

view full answer...

How Does the Gooseneck Hitch Ball of a B and W Turnover Ball Release from a Hitch

Product Page this Question was Asked From

Continue Researching