Replacement Brakes, Bearings & Seals for Passport Travel Trailer
Question:
Hi, My son has a Passport travel trailer with Dexter axles. Need brake assemblies and seals and bearings. Brake drums are 10-inch x 1-1/2 . Dont see listed on your web site . Am i missing them? Thanks.
asked by: Roy H
Helpful Expert Reply:
Replacement electric drum brakes like part # 23-26 come in several diameters and widths. Choosing the right brakes means matching up those dimensions, as well as the axle's weight rating and the brake mounting bolt pattern.
Trailer brakes are available in a 1-1/2-inch width, but these are 7-inch diameter brakes. The 10-inch-diameter brakes we offer are 2-1/4-inches wide and these typically use a 4-bolt mounting pattern. The linked page displays all electric drum brakes; click on the filters to select axle rating, etc.
New bearings and seals are best identified by finding the original part numbers on those items; you can search directly using those part numbers. If these cannot be found you'll need to use a precision caliper like # PTW80157 to measure the spindles at points B, C and D as shown on the linked image. You can then use the linked pages for bearings and seals to match up those spindle dimensions to new parts.
You may care to use a bearing packer like # ALL647646 along with grease gun # PTW54290 and wheel bearing grease # L11465.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
Powerbuilt Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- Powerbuilt
more information >
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
Heavy Duty Grease Gun - Lever Action - Aluminum
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 4500 psi
- 14 oz
- Performance Tool
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: How Many Volts Should a Brake Controller Put Out on the Highest Gain
- Q&A: Troubleshooting Trailer Brakes Getting Only 8 Volts Of Power
- Q&A: Recommendation to Replace Dexter 023-326-00 Electric Brake Assemblies on Trailer
- Q&A: Where is Dexter Bearing 31-73-3 Made & Is It Timken
- Q&A: Do Self Adjusting Trailer Brake Assemblies Have to be Manually Adjusted Initially
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide