Will Bearing Buddy # BB2717 Work With AL-KO 7,000-Lb Axle
Question:
Need bearing buddies for AL-KO 7000# axels....the covers on now are 2.72 on the outside. Are the Mod. 2717 the correct dia. on the outside?
asked by: Jim H
1
Helpful Expert Reply:
You will want to use a digital caliper like part # PTW80157 to measure the inside dimension of your hub to make sure you get the correct Bearing Buddy.
The Bearing Buddy Bearing Protectors, part # BB2717 are designed to fit a hub bore that is 2.717 inches diameter. If your outer bearing is a # 14125A, then the # BB2717 would work for you.
expert reply by:
Jeffrey L
1
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.717 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Cargo Tie-Down Methods
- Q&A: How to Measure for Selection of the Correct Bearing Buddy Bearing Protectors
- Article: Overview of Lubricating Grease
- Q&A: How to Bleed Brakes on Trailer Equipped with Titan Model 10 Hydraulic Brake Actuating Coupler
- Q&A: Replacement Hub Recommendation for Hub Stamped 8-219
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: Bearing Buddy Protectors for 7,000-lb Dexter axles
- Q&A: Selecting Correct Bearing Buddy for 8-Lug Hub on 7000-lb Axle on PJ Dump Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Measuring a Trailer Tire
- Article: Hitch Adapters and Extenders