Possible Hub Recommendation to Fit Mobile Home Axle with Bearings 25580 and 102949
Question:
I have a mobile home axle that uses a lm102949 inner bearing, which has a 1.781 id as opposed to the more common 25580 1.75 id. Outer is 1.25 and seal is standard/common. Do you have any hub swap solution or suggestions for bearing combo to get to the same dimensions on the race to fit the Dexter hub? Thank you.
asked by: Ray
Expert Reply:
There is a slight chance you have number 42 spindle dimensions on your mobile home axle.
Measure the diameter of your spindle to get the exact dimensions of where the bearings and seals ride. If the bearing dimensions are 1.74 and 1.25 and the seal diameter is 2.24 then you are in luck.
A hub like part # AKIHUB-865-7-1-K would fit. I attached a link to a page that has all the fits as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Trailer Hub Bearing - 15123
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Will Kodiak 13" Rotor Fit Dexter Hub on 8k Lippert Axle
- Q&A: How to Select Hub/Drums & Electric Brakes For Trailer
- Q&A: Hydrastar Disc Brake Kit For a 2018 Grand Design Momentum Triple Axle Toy Hauler With 7,000LB Axles
- Q&A: Troubleshooting Electric Trailer Brakes That Hum But Do Not Engage Drums
- Q&A: Drag Roller Recommendation for Boat Trailer with Prop Protector Cut Out
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Maintenance Schedule
- Article: How to Mount a Truck Bed Camper
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box